with stainless steel corrugated tube heat exchanger for hygienic hot water heating instantaneously only when tapped

Drinking water heat exchanger made of high quality stainless steel corrugated pipe material number 1.4404 or AISI 316L
integrated stainless steel exchanger with insulation separation (5.8 m2 exchanger surface, 29 liter capacity) anode-free, hygienic and legionella free,
no control or pump needed for DHW heating,
high tapping rates

Volumes from 500 liters to 10 000 liters.

Buffer Type KE are without solar or additional generator heat exchangers.

Buffer Type KER have a solar heat exchanger in the lower area.

Buffer Type KER2 have a solar heat exchanger in the lower area and an additional heat exchanger in the upper area.

Ideal for increasing the efficiency of heat pumps for domestic hot water.

double glazing inside, outside primed
50 mm PU hard foam, firmly foamed
made of high quality steel S235JRG2
produced according to DIN 4753 and Euronorm EN 12897

WAMAK SWP

Hot water storage to heat pumps, type SWP. Internally glazed hot water storage tanks are especially suitable for use with heat pumps. Both tanks and smooth tube heat exchangers are made of high quality steel S235JRG2 according to DIN 4753 and Euronorm EN 12897. The smooth tube heat exchanger is firmly welded in production. The container is glazed inside with a 2-layer glaze.

WAMAK SWP2

Hot water storage to heat pumps, type SWP. Internally glazed hot water storage tanks are especially suitable for use with heat pumps in combination with thermal solar panels. Both tanks and smooth tube heat exchangers are made of high quality steel S235JRG2 according to DIN 4753 and Euronorm EN 12897. The smooth tube heat exchanger is firmly welded in production. The container is glazed inside with a 2-layer glaze.

Buffer tanks, type P. Buffer tanks without heat exchangers with sufficient connections are used in heating, solid fuel and solar plants as well as cogeneration plants. Tanks are made of high quality steel S235JRG2 according to DIN 4753 and Euronorm EN 12897.

Buffer storage, type PR. Buffer tanks with a heat exchanger in lower section and with sufficient connections are used in heating, solid fuel and solar plants as well as cogeneration plants. Both tanks and smooth tube heat exchangers are made of high quality steel S235JRG2 according to DIN 4753 and Euronorm EN 12897. The smooth tube heat exchanger is firmly welded in the production.

Buffer storage, type PR2. Buffer tanks with two heat exchangers down / up and with sufficient connections are used in heating, solid fuel and solar plants as well as combined heat and power plants. Both tanks and smooth tube heat exchangers are made of high quality steel S235JRG2 according to DIN 4753 and Euronorm EN 12897. The smooth tube heat exchanger is firmly welded in the production.

Volumes 200 Liter up to 10 000 Liter.